Sign Clamp Floor Display
Our sign clamp floor display is a simple and convenient way of displaying your graphics inside or outside your store, event or trade show! Assemble by simply sliding included bolts through pre-drilled holes in your sign and clamp and secure with included wing nuts. The sign panel can be easily replaced when you are ready to update your message or graphics!
If You Need A Design Please Click Here And Add A Custom Sign Design To Your Cart Along With Your Sign Display.
- Includes 1 - 4mm Sign Panel (24" x 36" or 32" x 48")
- Sign panel is printed full color, 2 sides
- Sign comes with drilled holes and ready to mount in clamp
- Base hardware includes 2 feet
- Bolts and wing nuts included
- Base size: 24" x 14.5" x 3.3"
- Base material: Steel
- Holds up to 1" thick material
Artwork Preparation
Important: Please keep all important information at least 3" above the bottom of your artwork.
- Please create your file in CMYK mode with a resolution of 300dpi
- If your file has been created in RGB or includes RGB objects, we recommend converting the file to CMYK.
- Do not include bleed or crop marks in your artwork. Your artwork should reflect only what you need to be printed in the final product.
- Before you upload your artwork, be sure your artwork is sent in the same size or ratio as your order.
- All fonts should be converted to curves or outlines.
- We suggest your files be flattened or rasterized if possible to minimize the file size.
- We accept the following file formats: pdf, eps, svg, ai, psd, jpeg, png, tiff. Jpeg files are accepted, but it is strongly suggested that the jpeg is created at the closest size possible to the final print size.
